FSPE Adjustable Splitter Support Rods (Pair) - Blue

FSPE Adjustable Splitter Support Rods (Pair) - Blue

Some of the highest quality, most thought-out support rods on the market, now in blue. FSPE machines every rod on a CNC mill and lathe from aircraft grade 6061-T6 billet aluminum, so your aero stays put at speed.

Sold as a pair, these rods are most commonly used to hold up the front edge of a splitter, and they work just as well supporting a rear spoiler or wing. Pick your length and end type to match your setup.

Key Features

• Billet Construction: CNC machined from aircraft grade 6061-T6 billet aluminum.
• 1.75" of Adjustability: Reverse threaded barrel for quick, precise length changes.
• Stainless Hardware: Premium stainless steel hardware supplied with every kit.
• Easy Tightening: Flat spots built into the barrel (7/16") and the end pieces (3/4").
• Six Lengths, Six End Types: Configure standard, quick release or blind hole ends.
• Free Shipping: Ships free to all 50 US states.

Specifications

• Material: 6061-T6 billet aluminum
• Color: Blue
• Adjustability: 1.75" (reverse threaded)
• Hardware: Stainless steel, included
• Flats: 7/16" on the barrel, 3/4" on the end pieces
• Quantity: Pair (2 rods)
• Use: Splitter, spoiler or wing support (universal)

Fitment / Applications

• Universal fit: front splitters, rear spoilers and wings
• Choose the length range that matches your mounting points

Length Options

• 6.75" to 8.5"
• 8.5" to 10.25"
• 10.25" to 12"
• 12" to 13.75"
• 13.75" to 15.5"
• 15.5" to 17.25"

End Type Options

• Standard ends
• Standard 1 end and quick release 1 end
• Standard 1 end and blind hole 1 end
• Quick release ends
• Quick release 1 end and blind hole 1 end
• Blind hole ends

Quick Release Add-On

• Stainless steel removable clevis pin and hairpin.
• Rubber washers for cushion.
• Easier install and quick removal of the heim joint and barrel.

Blind Hole Add-On

• Countersunk hole added to the quick release end for threading into a blind hole.
• Designed for a 1/4"-20 bolt or thread (M6 can be used).
• A blind hole is a threaded hole you cannot reach from the back side.
• Still works as a normal quick release.
• 1/4"-20 x 1.25" countersunk bolts included.

Part Number Breakdown

• Splitter rods prefix: FSPESR
• Length: -SH, -ME, -LO, -XL, -XXL
• Color: -Silver, -Black, -Blue, -Red
• End type: -ST, -QR, -BH
• Example: 6.75" to 8.5", Silver, standard 1 end and quick release 1 end = FSPESR-SH-Silver-ST-QR

Notes

• These rods are built for race cars, so daily driving will take a toll on them.
• The rotating heim joints are prone to weathering, and road salt will cause surface rust. Ceramic coating the joints is recommended.
• Clean the heim joint threads periodically, then apply anti-seize to prevent binding between the joint and barrel.

Pro Tip: Pull your splitter often for trailering, steep driveways or street to track swaps? Go with quick release ends. You will save time and the threads will thank you.