RaceFlux Straight -6AN Hose End to 1/8" NPT

Purpose-sized for gauge and turbo plumbing: this hose end puts -6AN braided hose directly onto a 1/8" NPT port — the most common sensor and oil-feed thread on the engine — with no adapter fitting in between. One piece from hose to port means fewer leak points and a cleaner install.

Like all RaceFlux D-series hose ends, it swivels for easy installation, uses a left-hand threaded socket that keeps the hose from backing out during assembly, and is machined from a single piece of 6061-T6 aluminum with zero welds or brazes.

Key Features

• -6AN hose end with integrated 1/8" male NPT output
• Direct connection for the most common gauge, sensor, and turbo oil feed ports
• Swivel design for easy installation and re-clocking
• Left-hand threaded socket retains the hose while tightening
• One-piece machined 6061-T6 aluminum — no welds or brazes
• MilSpec Type II black anodized; FKM (Viton) seals; reusable
• Lifetime manufacturer's warranty

Specifications

Fitment & Compatibility

• For use with -6AN standard braided rubber hose, including RaceFlux RH1 and RH2 lightweight braided racing hose
• Compatible with gasoline, E85 and ethanol blends, diesel and biodiesel, methanol, racing fuels, engine oil, gear oil, transmission fluid, coolant, water, air, and vacuum
• Common uses: oil pressure gauge feeds, turbo oil supply lines, sensor port plumbing

Note: NPT threads seal on the taper — apply thread sealant and avoid overtightening into aluminum housings. Not compatible with PTFE (Teflon) hose.