Your cart (0)
Your cart is empty
Tax included and shipping calculated at checkout
Notified by email when this product becomes available
RaceFlux Straight Swivel Hose End Fitting
RaceFlux Straight Swivel Hose End Fitting
The RaceFlux straight swivel seal hose end gives you a reusable, leak-free connection for braided AN hose with a clean, straight exit — the workhorse fitting for most of the line, with angled DF hose ends reserved for the bends. The nut swivels for easy installation and alignment, and FKM (Viton) sealing keeps it leak-free across virtually every fluid you'd run in a race car.
The left-hand threaded socket is the detail that sets these apart: it grips the hose tighter as you tighten the fitting, so hoses don't back out during assembly.
Key Features
- Swivel seal for easy installation and alignment during assembly
- Left-hand threaded socket securely retains the hose while tightening
- One-piece machined construction with no welds or brazes
- Fully reusable and easy to assemble
- Lifetime manufacturer's warranty
Specifications
| Connection | AN hose end to female AN / JIC 37° flare |
| Fitting Angle | Straight |
| Body Material | 6061-T6 aluminum, MilSpec Type II black anodized |
| Seals | FKM (Viton) O-rings, stainless steel lock rings |
| Max Operating Pressure | 1,000 psi (68.9 bar) |
| Operating Temperature | -40°F to 302°F (-40°C to 150°C) |
Fitment & Compatibility
- For use with standard braided AN rubber hose, including RaceFlux RH1 and RH2 lightweight braided racing hose
- FKM seals are compatible with gasoline, racing fuels, E85+ and ethanol blends, diesel, methanol, engine oil, gear oil, transmission fluid, power steering fluid, coolant, water, nitrous oxide, air, and vacuum
- Suitable for fuel lines (in-tank or external), breather and vent lines, gauge and sensor lines, and vacuum lines
Note: Not compatible with PTFE (Teflon) hose. For PTFE lines, use RaceFlux TF-series hose ends.